load

Starite 2Hp Pump parts

Parts for the Hot Spring Starite 2hp Max-E-Glas Jet Pump

The Sta-rite 2Hp Max-E-Glas single speed pump was used on the Hot Spring 1989-1993 Highlife and the 1989-1991 230 volt only Sovereign (IH) model.

Sta-Rite 2Hp Jet Pump Parts Diagram Insert, Seal Plate, Starite-70071 Shaft Seal, Starite-30024 Impeller, Starite 2HP-70120 Diffuser, Starite-30221 Diffuser O-ring, Starite-30222 Diffuser Screw Washer, #8 Ext Tooth, Starite-70158 Diffuser Screw, #8-32 X 7/8in, Starite-70036 Volute Clamp, Starite w/out Nut-30219 Nut, Volute Clamp, Starite-30297 Volute O-Ring, Starite-30220 Compression Fitting, 1-1/2"-30548 Drain Nipple, Wavemaster 7000 (ver. 1 & 2) & 9000, Starite-32267 Adapter, 1-1/2in Mipt-31348 Bell Housing Cover-34480 Pump Start Capacitor-Starite 1HP-70128 Pump Run Capacitor, Starite 2HP-70121 Slinger-70039 Points-70129 Bolt, #3/8in-16 X 1in Hex, Starite-70059 Cordset, W/Plug Jet Pump-10409 Rubber Motor Pad-70034 Mounting Bolt Washer-30413 Bolt, Hex Hd 3/8in-16 X 1-3/4in, Starite-70035 Diffuser Screw Washer, #8 Ext Tooth, Starite-70158 Bolt, Hex Hd 3/8in-16 X 1-3/4in, Starite-70035
Find with Parts Finder Show compatibility chart Hide compatibility chart
This Sta-rite 2HP pump was used on the following spas:
MODEL Serial Range YEAR
Highlife (220v) K-291001 to K-131202 1989-1993
Sovereign (220v) IH-191001 to IH-419999 1989-1991


Search within products:

Barbed Fitting w/ o-ring, Wavemaster & Starite Item #: 32267

More Info  

Hot Spring, Hot Spot & Solana spas only
This drain nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple. The function of this 32267 nipple is to provide a place for the 1/4" vinyl tube to connect onto the suction side of the jet pump which in turn helps drain the jet pumps water when you drain the spa. Also helps prevent and "Air lock" in the Hot Springs baby circulation pumps (Silentflo) plumbing.
List Price: $2.30
Price: $1.96

Bolt, #3/8in-16 X 1in Hex, Starite Item #: 70059

More Info  

Stainless steel bolt used to connect the seal plate to the electric motor on both 1HP and 2HP Sta-rite Max-E-Glas jet pumps. (Ref. #14) on the Starite 1Hp parts page
(Ref. #14) on the Starite 2Hp parts
Price: $1.13

Bolt, 5/16 X 1-1/2in SS Hex Cap, Starite Item #: 30370

More Info  

Stainless steel bolt used on the 1HP and 2HP Sta-rite Max-E-Glas jet pumps to secure the mounting bracket to the floor in the Hot Spring equipment compartment.

(Ref. #16) on the Starite 1Hp parts page
(Ref. #16) on the Starite 2Hp parts
List Price: $1.00
Price: $0.85

Bolt, Hex Hd 3/8in-16 X 1-3/4in, Starite Item #: 70035

More Info  

Stainless steel bolt used to secure the 1HP and 2HP Sta-rite Max-E-Glas jet pump motor to the mounting bracket in the Hot Spring equipment compartment.

(Ref. #18) on the Starite 1Hp parts page
(Ref. #18) on the Starite 2Hp parts
Price: $1.13

Compression Fitting O-ring, for 1-1/2" Union Item #: 30237

More Info  

1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps.
List Price: $1.00
Price: $0.85

Diffuser O-Ring, Starite Item #: 30222

More Info  

Diffuser o-ring for the 1hp & 2hp Sta-rite jet pumps used in Hot Spring models prior to 1993.

(Ref. #3) on the Starite 1Hp parts page
(Ref. #3) on the Starite 2Hp parts
List Price: $2.50
Price: $2.13

Diffuser Screw Washer, #8 Ext Tooth, Starite Item #: 70158

More Info  

Diffuser screw washer used in addition to the diffuser screw that secures the diffuser in place on the 1HP and 2HP Sta-ite Max-E-Glas jet pumps used on Hot Spring models prior to 1993.

(Ref. #10) on the Starite 1Hp parts page
(Ref. #10) on the Starite 2Hp parts
List Price: $0.60
Price: $0.51

Diffuser Screw, #8-32 X 7/8in, Starite Item #: 70036

More Info  

Diffuser screws used to secure the diffuser in place on the 1HP and 2HP Sta-ite Max-E-Glas jet pumps used on Hot Spring models prior to 1993.

(Ref. #9) on the Starite 1Hp parts page
(Ref. #9) on the Starite 2Hp parts
List Price: $3.40
Price: $2.89

Diffuser, Starite Item #: 30221

More Info  

Sta-rite Diffuser used on the 1HP and 2HP Max-E-Glas jet pumps on Hot Spring spa models.

(Ref. #11) on the Starite 1Hp parts page
(Ref. #11) on the Starite 2Hp parts
List Price: $36.90
Price: $31.37

Impeller, 2Hp Starite
Previous1 of 3Next
Item #: 70120

More Info  

Replacement Sta-rite impeller for the 2Hp pumps used on the Hot Spring Highlife prior to 1992.

(Ref. #2) on the Starite 2Hp parts
List Price: $68.40
Price: $58.14

Insert, Seal Plate, Starite Item #: 70071

More Info  

Copper insert (heat sink) used on all 1HP and 2HP Starite Max-E-Glas jet pumps on Hot Spring spas.

(Ref. #25) on the Starite 1Hp parts page
(Ref. #25) on the Starite 2Hp parts
List Price: $10.10
Price: $8.59

Jet Pump Cordset, Hot Spring, Pre-1994 Item #: 10409

More Info  

Jet pump power cord used on Hot Spring spas prior to 1994.
List Price: $11.90
Price: $10.12

Mounting Bolt Washer, Wavemaster Item #: 30413

More Info  

Stainless steel washer for the Wavemaster 4000, 6000, 7000.3 and 8000 (ver. 2) jet pump mounting bolts. s
List Price: $0.70
Price: $0.60

Nut, Volute Clamp, Starite Item #: 30297

More Info  

This stainless steel volute clamp nut is used to tighten the volute clamp that binds the volute and seal plate together on all 1HP and 2HP Starite Max-E-Glas jet pumps that were used on Hot Spring spa models.

(Ref. #24) on the Starite 1Hp parts page
(Ref. #24) on the Starite 2Hp parts
List Price: $3.90
Price: $3.32

Pump Mounting Bracket, Starite 2HP
Previous1 of 2Next
Item #: 70126

More Info  

Pump mounting bracket used to secure the 2HP Sta-rite Max-E-Glas jet pump to the floor of the Hot Spring equipment compartment.
(Ref. #20) on the Starite 2Hp parts
List Price: $44.20
Price: $37.57

Rubber Motor Pad, Wavemaster 7000 (ver. 2) Item #: 70034

More Info  

OBSOLETE-

This pad goes underneath the steel motor base to provide a buffer against noisy motor vibrations.

List Price: $2.60
Price: $2.21
Not Available

Run Capacitor, Starite 2HP Item #: 70121

More Info  

Run capacitor used on all 2HP Starite Max-E-Glas jet pumps on Hot Spring spas.

(28) on the Starite 2Hp parts page
List Price: $143.90
Price: $122.32

Seal Plate, Starite Item #: 70032

More Info  

This Sta-rite seal plate is the part of the "wet end" that bolts onto the pump motor. This seal plate is the replacement for both the 1hp and 2hp Starite Max-E-Glas jet pumps used on Hot Spring models prior to 1993.

Note: Comes with a new shaft seal (part#30224)

(Ref. #1) on the Starite 1Hp parts page
(Ref. #1) on the Starite 2Hp parts
List Price: $120.00
Price: $102.00

Shaft Seal, Starite Item #: 30224

More Info  

Sta-rite shaft seal used on the 1HP and 2HP jet pumps on Hot Spring spas.

(Ref. #12) on the Starite 1Hp parts page
(Ref. #12) on the Starite 2Hp parts
List Price: $17.90
Price: $15.22

Slinger, Starite Item #: 70039

More Info  

Water slinger used on the 1HP and 2HP Sta-rite Max-E-Glas jet pumps on Hot Spring spas. The slinger prevents water, that may be leaking from the shaft seal, from dripping back into the windings of the electric motor and corroding that motor.

 

 

(Ref. #13) on the Starite 1Hp parts page
(Ref. #13) on the Starite 2Hp parts

List Price: $7.40
Price: $6.29

Spring Clamp, 1/4" Item #: 31134

More Info  

Used to secure 1/4" vinyl tubing to various components.

Note: Wear eye protection when squeezing these little rascals. Service techs typically use either needle nose pliers or hose clamp pliers to squeeze, then slide this spring clamp onto the vinyl tubing.
List Price: $0.60
Price: $0.51

Starite Compression Fitting, 1-1/2" Item #: 30548

More Info  

LIMITED SUPPLY & FACTORY OBSOLETED

1-1/2" compression coupling assembly (pump union) for all Starite pumps used on Hot Spring spas. (35) on the Starite 1Hp parts page
(35) on the Starite 2Hp parts

List Price: $34.20
Price: $29.07

Starite Compression Fitting, 1-1/2" Item #: 30550

More Info  

OBSOLETE AS OF 1-2011
1-1/2" compression coupling assembly (pump union) for all 1-1/2" Starite pump volutes. Sta-Rite pumps can be identified by the model number of the pump beginning with PE.
(38) on the Starite 1Hp parts page
(38) on the Starite 2Hp parts
Price: This item is not available
Not Available

Start Capacitor, Starite 2HP Item #: 70128

More Info  

Start capacitor used on all 2HP Starite Max-E-Glas jet pumps found on pre-1994 Hot Spring spas.

(Ref. #29) on the Starite 2Hp parts
List Price: $55.70
Price: $47.35

Start Switch, Starite Item #: 70129

More Info  

Start switch (points) used on the 1HP and 2HP Sta-rite Max-E-Glas jet pumps on Hot Spring spas.

(Ref. #31) on the Starite 1Hp parts page
(Ref. #31) on the Starite 2Hp parts
Price: This item is not available
Not Available

Vinyl Tubing, Thick Walled, 1/4" Dia. (ID) x 24" Item #: 70318

More Info  

1/4" inside diameter (ID) by 24" long section of specially made thick walled, clear vinyl tubing. This thick walled tubing will stand up to the harsh chlorinated spa environment for years to come. This is the size of tubing that connects from the front of the jet pump to the circulation pump and heater's plumbing in all 1985-2009 Hot Spring spa models. Click on the "More Info" button for details.
List Price: $2.90
Price: $2.47

Volute Clamp, Starite w/out Nut Item #: 30219

More Info  

This stainless steel volute clamp is used to bind the volute and seal plate together on all 1HP and 2HP Starite Max-E-Glas jet pumps that were used on Hot Spring spa models.

(Ref. #8) on the Starite 1Hp parts page
(Ref. #8) on the Starite 2Hp parts
List Price: $91.10
Price: $77.44

Volute O-Ring, Starite Item #: 30220

More Info  

Volute o-ring used on the Sta-rite 1HP and 2HP Max-E-Glas jet pump on Hot Spring spa models prior to 1993.

(Ref. #7) on the Starite 1Hp parts page
(Ref. #7) on the Starite 2Hp parts
List Price: $8.00
Price: $6.80

Volute, Starite Item #: 30217

More Info  

This Sta-rite volute is the front part of the "wet end" of the 1HP and 2HP Max-E-Glas jet pumps used on the Hot Spring spa models prior to 1993.

(Ref. #6) on the Starite 1Hp parts page
(Ref. #6) on the Starite 2Hp parts
List Price: $99.80
Price: $84.83