load

Wavemaster® 6000 parts

Parts for Watkins Wavemaster® 6000 Jet Pump

This WavemasterŪ 6000 one and a half horsepower two speed jet pump was used on the 2000-2002 Hot Spot SLXtra and 2003-current Solana SX spa models. The two speed function employs the low speed for automatic filtration and high speed for hydrotherapy. The jet pump is designed for 115v. operation for the convenience of a Plug 'N Play environment.

Wavemaster 6000 Exploded Illustration
Find with Parts Finder Show compatibility chart Hide compatibility chart
Wavemaster® 6000, 1 HP/ 2-Speed pump used in the following spas:
MODEL YEAR Serial # Range
SLXtra (square) 2001-2002 W 1C1001 - W 4D9999
MODEL YEAR Serial # Range
SX 2003-current SX 1E1001 - current

Technical Specs:
13.8 amp/115 Volts AC, 1.5 hp in high speed or 3.8 amp/115 Volt AC in low speed Old PN: 38944, 72030


Search within products:

Barbed Fitting w/ o-ring, Wavemaster & Starite Item #: 32267

More Info  

Hot Spring, Hot Spot & Solana spas only
This drain nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple. The function of this 32267 nipple is to provide a place for the 1/4" vinyl tube to connect onto the suction side of the jet pump which in turn helps drain the jet pumps water when you drain the spa. Also helps prevent and "Air lock" in the Hot Springs baby circulation pumps (Silentflo) plumbing.
List Price: $2.30
Price: $1.96

Compression Fitting, 2" with O-Ring Item #: 71036

More Info  

This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling. It is found on the suction side of most Wavemaster® Jet Pumps. Other compression fittings are the # 71038) and # 71037.
List Price: $10.20
Price: $8.67

Drain Plug, Wavemaster Item #: 32267-1

More Info  

This fitting is located on the front of the Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps.
List Price: $1.10
Price: $0.94

Exhaust Hose, Wavemaster Item #: 72344

More Info  

This exhaust hose connects onto the rear of the jet pumps shroud (if equipped) to discharge hot air from the jet pump motor. This method of cooling the jet pump insures a longer lifespan of the pumps motor.
List Price: $9.10
Price: $7.74

Impeller, Wavemaster 6000 Item #: 71404

More Info  

Replacement impeller for the Watkins Wavemaster 6000 jet pump. This impeller screws onto the pump motor's threaded shaft with regular right hand threads.
List Price: $27.40
Price: $23.29

Mounting Bolt Washer, Wavemaster Item #: 30413

More Info  

Stainless steel washer for the Wavemaster 4000, 6000, 7000.3 and 8000 (ver. 2) jet pump mounting bolts. s
List Price: $0.70
Price: $0.60

Mounting Bolt, Wavemaster Item #: 30018

More Info  

1/4-20 X 1-1/4" long mounting bolt that secures the pump to the floor of the equipment compartment. Used on the Wavemaster 4000, Wavemaster 6000 and Wavemaster 7000.3 jet pumps.
List Price: $0.80
Price: $0.68

Pump Shroud, Wavemaster Item #: 71415

More Info  

For Magnetek or AO Smith Century Motors Only
Replacement manifold (pump shroud) for the Watkins Wavemaster 4000, 5000, 5000 (ver.2), 6000, 7000 (ver. 3), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. This shroud attaches onto the rear of the Magnetek or AO Smith Century motor. Its purpose is to divert heated air from the motor through an exhaust hose to the exterior of the equipment compartment. Cool running jet pump motors last longer!
List Price: $15.00
Price: $12.75

Shaft Seal Kit, Wavemaster Item #: 71447

More Info  

The shaft seal kit is used to prevent water leaking from around the rotating pump shaft. This seal kit is used on most of the Wavemaster jet pumps including the Wavemaster 3000, 4000, 5000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000, 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 2), 9000 (ver. 3), and 9200 jet pumps.
Price: $16.54

Volute Cover Screw, 8-32 X 5/8", Wavemaster Item #: 71413

More Info  

This stainless steel screw is used to attach the volute cover to the volute on most Wavemaster jet pumps.
List Price: $1.00
Price: $0.85

Volute Cover, Wavemaster Item #: 71696

More Info  

The volute suction cover is the second half of the pumps volute. This factory replacement is for the Wavemaster 4000, 6000, 8000 (ver. 3), 8200, 9000 (ver. 3), 9200 jet pumps.
List Price: $39.30
Price: $33.41

Volute O-Ring, Wavemaster Item #: 71554

More Info  

Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver. 3), 8200, 9000 (ver. 3), 9200 jet pumps.
List Price: $1.70
Price: $1.45

Volute, Wavemaster Item #: 71693

More Info  

This part connects onto the motor using long bolts that insert through the rear of the pump motor and screw into this volute. Replacement volute for the Wavemaster 4000, 6000, 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps.
List Price: $41.00
Price: $34.85

Wear Ring, Wavemaster Item #: 71409

More Info  

Wear Ring (slinger) for the Watkins Wavemaster 4000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps.
List Price: $1.70
Price: $1.45