load

Wavemaster® 9000 parts (ver. 1)

Parts for Watkins Wavemaster 9000, 2 hp Jet Pump

This is the first version of the Wavemaster 9000 jet pump. It is a two horsepower one speed jet pump used on three Hot Spring models: The 1994-1996 Highlife, 1995-1996 Summit and Landmark.

Wavemaster 9000 Exploded Illustration Find with Parts Finder Show compatibility chart Hide compatibility chart
Wavemaster® 9000, 2.5 HP/ 1-Speed pump used in the following spas:
MODEL YEAR Serial # Range
Highlife K-141069 to K-469999 1994-1996
Summit R-251004 to R-369999 1995-1996
Landmark S-251004 to S-369999 1995-1996

Technical Specs:
11.5 amp/230 volts, 2 hp, 1 speed


Search within products:

Barbed Fitting w/ o-ring, Wavemaster & Starite Item #: 32267

More Info  

Hot Spring, Hot Spot & Solana spas only
This drain nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple. The function of this 32267 nipple is to provide a place for the 1/4" vinyl tube to connect onto the suction side of the jet pump which in turn helps drain the jet pumps water when you drain the spa. Also helps prevent and "Air lock" in the Hot Springs baby circulation pumps (Silentflo) plumbing.
List Price: $2.30
Price: $1.96

Base, Wavemaster 9000 Item #: 70959

More Info  

Black plastic base that serves two purposes. First is to support the pump & motor and the second is to secure the base to the equipment compartment floor.
Price: This item is not available
Not Available

Compression Fitting O-Ring, Wavemaster 7000 (ver. 2)  & 9000 Item #: 35283

More Info  

OBSOLETE
Compression fitting o-ring (pump union) for all the Wavemaster 7000 (v.2) & Wavemaster 9000 (v.1) jet pumps. Use the 34447 o-ring .
Price: This item is not available
Not Available

Diffuser Lock Washer, #8 Ext.Tooth Wavemaster 7000 (ver. 2) & 9000 Item #: 70952

More Info  

Lock washer for the diffuser screw on a Wavemaster 7000 (ver. 2) and Wavemaster 9000 jet pump.
List Price: $1.70
Price: $1.45

Diffuser Screw, 8-32 X 7/8" Rd.Hd.,  Wavemaster 7000 (ver. 2) & 9000 Item #: 70951

More Info  

This stainless steel screw secures the diffuser to the seal plate on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump.
List Price: $1.90
Price: $1.62

Diffuser, Wavemaster 7000 (ver. 2) & 9000 Item #: 70947

More Info  

The diffuser mounts onto the seal plate of the Wavemaster 7000 second version and the Wavemaster 9000 jet pump using seven stainless steel screws.
List Price: $21.50
Price: $18.28

Exhaust Hose, Wavemaster Item #: 72344

More Info  

This exhaust hose connects onto the rear of the jet pumps shroud (if equipped) to discharge hot air from the jet pump motor. This method of cooling the jet pump insures a longer lifespan of the pumps motor.
List Price: $9.10
Price: $7.74

Flat Washer, 3/8" Wavemaster 7000 (ver. 2) & 9000 Item #: 70953

More Info  

Flat Volute washer for the Wavemaster 7000 version 2 and he Wavemaster 9000.
List Price: $1.70
Price: $1.45

Gasket, Impeller Screw Wavemaster 9000 Item #: 70945

More Info  

This little gasket fits over the impeller screw and is snugged into place against the impeller when the screw is tightened.
List Price: $5.20
Price: $4.42

Hex Screw, 3/8-16 X 1" Wavemaster 7000 (ver. 2) & 9000 Item #: 70956

More Info  

This hex screw runs through the flange of the motore into the seal plate on a Wavemaster 7000 second version and a Wavemaster 9000 jet pump.
List Price: $3.10
Price: $2.64

Impeller Screw, Wavemaster 9000 Item #: 70946

More Info  

This stainless steel screw holds the impeller onto the Wavemaster 9000 jet pump shaft.
List Price: $14.00
Price: $11.90
Not Available

Impeller, Wavemaster 9000 Item #: 70944

More Info  

Impeller for the Wavemaster 9000 jet pump. This impeller screws onto the pump motor's threaded shaft with regular right hand threads.
List Price: $47.60
Price: $40.46

Nut Hex 3/8"-16 Wavemaster 7000 (ver. 2) & 9000 Item #: 70955

More Info  

This nut goes onto the volute bolt that secures the seal place to the volute.
List Price: $2.30
Price: $1.96

O-Ring, Diffuser Wavemaster 7000 (ver. 2) & 9000 Item #: 70948

More Info  

(Ref. #14) O-ring that mounts onto the front of the pump diffuser.
List Price: $5.10
Price: $4.34

O-Ring, Seal Plate, Wavemaster 7000 (ver. 2) & 9000 Item #: 70942

More Info  

Largest o ring on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump seal plate.
List Price: $7.20
Price: $6.12

Pump Shroud Air Vent, Wavemaster 7000 (ver. 2) & 9000 Item #: 34480

More Info  

Pump Shroud Air Vent for Wavemaster 7000 version 2 and Wavemaster 9000.
List Price: $31.20
Price: $26.52

Seal Plate, Wavemaster 7000 (ver. 2) & 9000 Item #: 70941

More Info  

Seal Plate for the Wavemaster 7000 version 2 and the Wavemaster 9000.
List Price: $86.10
Price: $73.19

Shaft Seal, Wavemaster 7000 (ver. 2) & 9000 Item #: 71030

More Info  

Shaft Seal for the Wavemaster 7000 version 2 and the Wavemaster 9000. Click on the"More Info" button for details.
List Price: $19.40
Price: $16.49

Slinger, Wavemaster 7000 (ver. 2) & 9000 Item #: 70940

More Info  

This slinger is for the Wavemaster 7000 version 2 and the Wavemaster 9000. If the pumps shaft seal was to begin leaking, the slinger would "sling" water off the shaft to prevent that water from migrating into the electric motor.
List Price: $2.10
Price: $1.79

Volute Lock Washer, 3/8" Wavemaster 7000 (ver. 2) & 9000 Item #: 70954

More Info  

One of two volute washers on the Wavemaster 7000 (second version) and the Wavemaster 9000 jet pump.
List Price: $2.30
Price: $1.96

Volute, Wavemaster 7000 (ver. 2) & 9000 Item #: 70960

More Info  

Volute for the Wavemaster 7000 version 2 and the Wavemaster 9000 v.1.
List Price: $135.40
Price: $115.09