I find backyard plus sort of amazing.. Whenever I have a problem with my 18 year old tub (which is about ever 9 months or so) I can almost always go here and find parts. They describe how to troubleshoot to verify that this part might be broken and provide great videos on how to replace. When I jumped in the tub a few weeks back (and then jumped right out... it was cold!) I didn't hesitate, tracked down this part... verified it was a replacement and ordered it. Two days later I replaced it (my old board looked fine from the front but when I pulled it off you could see the charring on the back) and now the hot tub it happily working again! They are amazon-like in how fast they ship, have great support (the few times I had to call in with a question) and provide great example videos and written documentation -- if you are AT ALL handy you can totally maintain the hot tub yourself and backyard plus is a great partner. Regarding this specific part -- I had a 2006 model and the board was a different design but 100% fit with no problems -- The thing to test is ifs your HTR led is on there should be voltage (128v AC in my case) switched to the heater unit (the cables to the left of the board) -- mine registers about 2v AC so I suspected it was this board. As I mentioned when I replaced it you could see the charring on the backside and the new board is now happily working great.On 04/08/2024 by J. M. (verified customer)
Be the first to review “Motor, 2.0 Hp, Wavemaster 8000 (ver. 2)”