Free shipping* (Some exclusions apply)
(805)541-9000 Mon-Fri 6:30am - 5pm PDT

Wavemaster® 5000 (ver. 1) parts

Parts for Watkins Wavemaster 5000 1 Hp Jet Pump

This WavemasterŪ 5000 one horsepower one speed jet pump was used on the 1989-1996 Hot Spring Prodigy and Jetsetter models. This pump was also used on the Tiger River spa brand on the 1992-1993 Khyber, 1992-1996 Manora, 1992-1996 Tondi models.

Wavemaster 5000 Exploded Illustration
Find with Parts Finder Show compatibility chart Hide compatibility chart
Wavemaster® 5000, 1 HP/ 1-Speed pump used in the following spas:
MODEL Serial # Range YEAR
Prodigy 1989-1996 H-191001 to H-469999
Jetsetter 1989-1996 J-191001 to J-469999
MODEL YEAR Serial # Range
Khyber 1992-1993 L-320001 to L-439999
Manora 1992-1996 M-320001 to M-469999
Tondi 1992-1996 N-320001 to N-469999
Tondi (round) 1995-1996 P-151001 to P-469999

Technical Specs:
16 amp/115 Volts AC or 8 amp/230 volt AC, 1 hp, 1 speed



1/2" Barbed Fitting, Wavemaster (Tiger River/Limelight Only)

For Tiger River and Limelight spas only
This 1/2" barbed adapter fitting is located on the front of  Wavemaster Jet Pumps on Tiger River and Limelight spas. Click on the "More Info" button for details.  Teflon tape should be used on the threads of this fitting for installation.

Price: $3.15
Barbed Fitting w/ o-ring, Wavemaster & Starite

Hot Spring, Hot Spot & Solana spas only
This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple. The function of this 32267 nipple is to provide a place for the 1/4" vinyl tube to connect onto the suction side of the jet pump which in turn helps drain the jet pumps water when you drain the spa. Also helps prevent and "Air lock" in the Hot Springs baby circulation pumps (Silentflo) plumbing.

Price: $2.94
Compression Fitting O-ring, for 1-1/2" Union

1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps.  This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump.  No teflon tape is needed for the jet pump connections.

Price: $1.47
Compression Fitting, 1-1/2" with O-Ring

This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling. It is found on the suction and/or discharge side of Wavemaster® Jet Pumps.

1-1/2" Compression Fitting click here
2" x 1-1/2" Compression Fitting click here
2" Compression Fitting click here

Price: $9.04
Compression Fitting, 2" with O-Ring

This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling. It is found on the suction side of most Wavemaster® Jet Pumps. Other compression fittings are the # 71038) and # 71037.

Price: $12.71
Exhaust Hose, Wavemaster

This exhaust hose connects onto the rear of the jet pumps shroud (if equipped) to discharge hot air from the jet pump motor. This method of cooling the jet pump insures a longer lifespan of the pumps motor.

Price: $11.24
Impeller, Wavemaster 5000 1Hp 1-Speed

Wavemaster® 5000 one horsepower one speed jet pump impeller. This impeller screws onto the pump motor's threaded shaft with regular right hand threads.

Watch Video

**If your pump has vendor number of "3861" or is a PowerRite or Vico Jet pump, WE DO NOT HAVE REPLACEMENT PARTS. If your Jet pump is an LX jet pump (Vendor Code 3536) the complete wet end must be purchased. Please call our techs for further information and help in finding the correct parts. 

Price: $24.90
Jet Pump Cordset, Hot Spring, 1990-1996

Power cord used on all jet pumps in all Hot Spring spa models from 1990 through the end of 1996. The plug configuration matches the control box receptacle part# 10408.

Price: $11.48
Not Available
Jet Pump Cordset, Tiger River, 1992-1994

14/3 X 48" power cord with the correct connector for the 1992-1994 Tiger River Khyber, Manora and Tondi spa models.

Price: $22.90
Power Cord, Wavemaster, Tiger River

Power cord with the correct connector for the 1995-1996 Tiger River Tondi and Manora spa models.

Price: $17.44
Pump Duct Hose, Wavemaster

OBSOLETE-Use the 72344
Black flexible duct hose (looks like dryer vent hose) attaches to the rear of the jet pump shroud to exhaust heat from the pumps motor to outside of the equipment compartment.

Price: Not available
Not Available
Pump Shroud, Wavemaster

OBSOLETE-Use 71414
The shroud attaches to the bottom rear of the motor on the Wavemaster 3000, Wavemaster 5000 & Wavemaster 8000. Its function is to exhaust the heat from the motor through a vent duct (not included) to the outside of the equipment compartment. This feature insures longer life on the Wavemaster pump motors.

Price: Not available
Not Available
Pump Shroud, Wavemaster

This part is obsolete at the factory but we have 1 left in-stock.

Replacement manifold (pump shroud) for the Watkins Wavermaster 3000, 5000 (ver. 1),  7000 (ver. 3) and 8000 (ver. 1 & 2) jet pumps that used an Emerson motor. This shroud attaches onto the rear of the motor and its purpose is to divert heated air from the motor through an exhaust hose to the exterior of the spa. Cool running pump motors last longer!

Price: $18.79
Pump Shroud, Wavemaster

OBSOLETE

For Magnetek or AO Smith Century Motors Only

Replacement manifold (pump shroud) for the Watkins Wavemaster 4000, 5000, 5000 (ver.2), 6000, 7000 (ver. 3), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. This shroud attaches onto the rear of the Magnetek or AO Smith Century motor. Its purpose is to divert heated air from the motor through an exhaust hose to the exterior of the equipment compartment. Cool running jet pump motors last longer!

Price: Not available
Not Available
Shaft Seal Kit, Wavemaster

GECKO MODEL SHAFT SEAL

The shaft seal kit is used to prevent water leaking from around the rotating pump shaft. This seal kit is used on most of the Wavemaster jet pumps including the Wavemaster 3000, 4000, 5000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000, 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 2), 9000 (ver. 3), and 9200 jet pumps.

Please note:  If your pump has a vendor number of "4081" on it, then use this part. If your pump has a vendor number of "3536" on it, use part number 77363

**If the vendor number is "3861", WE DO NOT HAVE REPLACEMENT PARTS. Please order the complete pump 71699.

Price: $21.12
Volute Cover, Wavemaster

The volute cover is the second half of the "wet end" (front end or suction plate) and attaches to the volute on all Wavemaster 3000, Wavemaster 5000 and Wavemaster 8000 jet pumps.

Price: $33.62
Volute O-ring, Wavemaster

Large o ring that fits in between the two halves of the "wet end" (volute & volute cover) of the Wavemaster 3000, Wavemaster 5000 & Wavemaster 8000 jet pumps.

Price: $2.31
Volute, Wavemaster

This volute is one half of the "wet end". This part attaches to the jet pump motor with four bolts that are accessed from the rear of the Wavemaster 3000, Wavemaster 5000 & Wavemaster 8000 jet pump motors.

Price: $36.46
Wear Ring, Wavemaster

The jet pump wear ring (slinger) keeps water from back flowing around the impeller which would reduce the jet pressure significantly. Click on the "More Info" button for details.

Price: $2.10