Free shipping* (Some exclusions apply)
(805)541-9000 Mon-Fri 6:30am - 5pm PDT

Wavemaster® 9000 parts (ver. 1)

Parts for Watkins Wavemaster 9000, 2 hp Jet Pump

This is the first version of the Wavemaster 9000 jet pump. It is a two horsepower one speed jet pump used on three Hot Spring models: The 1994-1996 Highlife, 1995-1996 Summit and Landmark.

Wavemaster 9000 Exploded Illustration Find with Parts Finder Show compatibility chart Hide compatibility chart
Wavemaster® 9000, 2.5 HP/ 1-Speed pump used in the following spas:
MODEL YEAR Serial # Range
Highlife K-141069 to K-469999 1994-1996
Summit R-251004 to R-369999 1995-1996
Landmark S-251004 to S-369999 1995-1996

Technical Specs:
11.5 amp/230 volts, 2 hp, 1 speed


Barbed Fitting w/ o-ring, Wavemaster & Starite

Hot Spring, Hot Spot & Solana spas only
This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple. The function of this 32267 nipple is to provide a place for the 1/4" vinyl tube to connect onto the suction side of the jet pump which in turn helps drain the jet pumps water when you drain the spa. Also helps prevent and "Air lock" in the Hot Springs baby circulation pumps (Silentflo) plumbing.

Price: $2.94
Base, Wavemaster 9000

Black plastic base that serves two purposes. First is to support the pump & motor and the second is to secure the base to the equipment compartment floor.

Price: Not available
Not Available
Compression Fitting O-Ring, Wavemaster 7000 (ver. 2)  & 9000

OBSOLETE
Compression fitting o-ring (pump union) for all the Wavemaster 7000 (v.2) & Wavemaster 9000 (v.1) jet pumps. Use the 34447 o-ring .

Price: Not available
Not Available
Diffuser Lock Washer, #8 Ext.Tooth Wavemaster 7000 (ver. 2) & 9000

Lock washer for the diffuser screw on a Wavemaster 7000 (ver. 2) and Wavemaster 9000 jet pump.

Price: $2.31
Diffuser Screw, 8-32 X 7/8" Rd.Hd.,  Wavemaster 7000 (ver. 2) & 9000

This stainless steel screw secures the diffuser to the seal plate on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump.

Illustration # ( 20 ) on the Wavemaster 7000 (ver. 2) Page.
Illustration # ( 20 ) on the Wavemaster 9000 Page.

Price: $2.52
Diffuser, Wavemaster 7000 (ver. 2) & 9000

The diffuser mounts onto the seal plate of the Wavemaster 7000 second version and the Wavemaster 9000 jet pump using seven stainless steel screws.

Illustration # ( 13 ) on the Wavemaster 7000 (ver. 2) Page.
Illustration # ( 13 ) on the Wavemaster 9000 Page.
 

Price: $26.37
Exhaust Hose, Wavemaster

This exhaust hose connects onto the rear of the jet pumps shroud (if equipped) to discharge hot air from the jet pump motor. This method of cooling the jet pump insures a longer lifespan of the pumps motor.

Price: $11.24
Flat Washer, 3/8" Wavemaster 7000 (ver. 2) & 9000

Flat Volute washer for the Wavemaster 7000 version 2 and he Wavemaster 9000.

Price: $2.31
Gasket, Impeller Screw Wavemaster 9000

This little gasket fits over the impeller screw and is snugged into place against the impeller when the screw is tightened.

Price: $6.51
Hex Screw, 3/8-16 X 1" Wavemaster 7000 (ver. 2) & 9000

This hex screw runs through the flange of the motor into the seal plate on a Wavemaster 7000 second version and a Wavemaster 9000 jet pump.  They are used to hold the seal plate in place against the motor.

Illustration # ( 4 ) on the Wavemaster 7000 (ver. 2) Page.
Illustration # ( 4 ) on the Wavemaster 9000 Page.
 

Price: $3.89
Impeller Screw, Wavemaster 9000

This stainless steel screw holds the impeller onto the Wavemaster 9000 jet pump shaft.

Price: $17.33
Not Available
Impeller, Wavemaster 9000

Impeller for the Wavemaster 9000 jet pump. This impeller screws onto the pump motor's threaded shaft with regular right hand threads.

Illustration # ( 2 ) on the Wavemaster 9000 Page.

Price: $58.31
Jet Pump Cordset, Hot Spring, 1990-1996

Power cord used on all jet pumps in all Hot Spring spa models from 1990 through the end of 1996. The plug configuration matches the control box receptacle part# 10408.

Price: $11.48
Not Available
Nut Hex 3/8"-16 Wavemaster 7000 (ver. 2) & 9000

This nut goes onto the volute bolt that secures the seal place to the volute.

Price: $2.94
O-Ring, Diffuser Wavemaster 7000 (ver. 2) & 9000

(Ref. #14) O-ring that mounts onto the front of the pump diffuser.

Price: $6.41
O-Ring, Seal Plate, Wavemaster 7000 (ver. 2) & 9000

Largest o ring on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump seal plate.

Price: $9.35
Pump Shroud Air Vent, Wavemaster 7000 (ver. 2) & 9000

Pump Shroud Air Vent for Wavemaster 7000 version 2 and Wavemaster 9000.

Price: $38.14
Seal Plate, Wavemaster 7000 (ver. 2) & 9000

Seal Plate for the Wavemaster 7000 version 2 and the Wavemaster 9000.

Price: $106.85
Shaft Seal, Wavemaster 7000 (ver. 2) & 9000

Replacement Shaft Seal for the Wavemaster 7000 version 2 and the Wavemaster 9000.

Instructions

Illustration # ( 10 ) on the Wavemaster 7000 (ver. 2) Page.
Illustration # ( 10 ) on the Wavemaster 9000 Page.

Price: $29.10
Slinger, Wavemaster 7000 (ver. 2) & 9000

This slinger is for the Wavemaster 7000 version 2 and the Wavemaster 9000. If the pumps shaft seal was to begin leaking, the slinger would "sling" water off the shaft to prevent that water from migrating into the electric motor.

Price: $4.52
Volute Lock Washer, 3/8" Wavemaster 7000 (ver. 2) & 9000

One of two volute washers on the Wavemaster 7000 (second version) and the Wavemaster 9000 jet pump.

Price: $2.94
Volute, Wavemaster 7000 (ver. 2) & 9000

Volute for the Wavemaster 7000 version 2 and the Wavemaster 9000 v.1.

List Price: $192.20
Price: $163.37