Free shipping* (Some exclusions apply)
(805)541-9000 Mon-Fri 6:30am - 5pm PDT

Wavemaster® 9200 parts

Parts for the 2004-now Watkins Wavemaster 9200 Jet Pump

This Wavemaster® 9200 two horsepower, two speed jet pump was used on the 2005-2006 Hot Spring Accolade, 2004-current Vista and the 2005-current Tiger River Caspain spa models.

Wavemaster 9200 Exploded IllustrationFind with Parts Finder Show compatibility chart Hide compatibility chart
Wavemaster® 9200, 2.5 HP/ 2-Speed pump used in the following spas:
MODEL YEAR Serial # Range
Accolade 2005-2006 AC-1G1001 to AC-3H9999
Vista 2004-current SS-1F1001 to current
MODEL YEAR Serial # Range
Caspian 2005-current CHP-1G1001 to current

Barbed Fitting w/ o-ring, Wavemaster & Starite

Hot Spring, Hot Spot & Solana spas only
This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple. The function of this 32267 nipple is to provide a place for the 1/4" vinyl tube to connect onto the suction side of the jet pump which in turn helps drain the jet pumps water when you drain the spa. Also helps prevent and "Air lock" in the Hot Springs baby circulation pumps (Silentflo) plumbing.

Price: $2.94
Compression Fitting, 2" with O-Ring

This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling. It is found on the suction side of most Wavemaster® Jet Pumps. Other compression fittings are the # 71038) and # 71037.

Price: $12.71
Drain Fitting O-Ring, Wavemaster

OBSOLETE-Use drain fitting 32267 or 32267-1.
Used on the drain fitting on the front of various Wavemaster jet pumps.

Price: $0.90
Not Available
Exhaust Hose, Wavemaster

This exhaust hose connects onto the rear of the jet pumps shroud (if equipped) to discharge hot air from the jet pump motor. This method of cooling the jet pump insures a longer lifespan of the pumps motor.

Price: $11.24
Impeller, Wavemaster 9000/9200

This impeller is used on the Wavemaster 9000 (ver. 2), 9000 (ver. 3) and Wavemaster 9200 jet pumps. This impeller screws onto the pump motor's threaded shaft with regular right hand threads. 

**If your pump has vendor number of "3861" or is a PowerRite or Vico Jet pump, WE DO NOT HAVE REPLACEMENT PARTS. If your Jet pump is an LX jet pump (Vendor Code 3536) the complete wet end must be purchased. Please call our techs for further information and help in finding the correct parts. 

Price: $26.20
Pump Shroud, Wavemaster

OBSOLETE

For Magnetek or AO Smith Century Motors Only

Replacement manifold (pump shroud) for the Watkins Wavemaster 4000, 5000, 5000 (ver.2), 6000, 7000 (ver. 3), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. This shroud attaches onto the rear of the Magnetek or AO Smith Century motor. Its purpose is to divert heated air from the motor through an exhaust hose to the exterior of the equipment compartment. Cool running jet pump motors last longer!

Price: Not available
Not Available
Rubber Foot, Wavemaster

Used on the base of the Wavemaster 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pump to reduce the pumps noisy vibrations being transferred to the spa shell. Sold individually.

Price: $1.91
Shaft Seal Kit, Wavemaster

GECKO MODEL SHAFT SEAL

The shaft seal kit is used to prevent water leaking from around the rotating pump shaft. This seal kit is used on most of the Wavemaster jet pumps including the Wavemaster 3000, 4000, 5000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000, 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 2), 9000 (ver. 3), and 9200 jet pumps.

Please note:  If your pump has a vendor number of "4081" on it, then use this part. If your pump has a vendor number of "3536" on it, use part number 77363

**If the vendor number is "3861", WE DO NOT HAVE REPLACEMENT PARTS. Please order the complete pump 71699.

Price: $21.12
Volute Cover Screw, 8-32 X 5/8", Wavemaster

GECKO MODEL SCREW

This stainless steel screw is used to attach the volute cover to the volute on most Wavemaster jet pumps.

Price: $1.47
Volute Cover, Wavemaster

GECKO MODEL VOLUTE COVER

The volute suction cover is the second half of the pumps volute. This factory replacement is for the Wavemaster 4000, 6000, 7000 (ver. 3), 8000 (ver. 3), 8200, 9000 (ver. 3), 9200 jet pumps. Click on the "More Info" button for details.

Price: $40.39
Volute O-Ring, Wavemaster

GECKO MODEL O-RING

Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver. 3), 8200, 9000 (ver. 3), 9200 jet pumps.

Price: $2.31
Volute, Wavemaster

GECKO MODEL VOLUTE

This part connects onto the motor using four long hex bolts that insert through the rear of the pump motor and screw into this volute. Replacement volute for the Wavemaster 4000, 6000, 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. Clcik on the "More Info" button for details.

Price: $41.05
Wear Ring, Wavemaster

GECKO MODEL WEAR RING

Wear Ring (slinger) for the Watkins Wavemaster 4000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. Please note: This wear ring is for pumps that have a Vendor Number of "4081" printed on the pump motor. Click more info for details. 

Price: $5.93
Wet End Kit, Wavemaster 9000/9200 2.5 hp Pump

PLEASE NOTE:  Please check your pump for the vendor number.  If the vendor number is 4081 use this Wet End Kit.  If the vendor number is 3536, use part number 77713

This is the complete "wet end" of the jet pump. Your Wavemaster 9000 & 9200 (v.2), 2.5 HP jet pump is comprised of two main components: the electric motor and the "wet end". In some cases, this entire "wet end kit" is needed. Perfect remedy if your "wet end" has cracked since neither the volute (attaches to the motor) or the volute cover (front of the pump) are available individually from the manufacturer.

:
:
List Price: $126.90
Price: $107.86