(805)541-9000 Mon-Fri 10am - 5pm PDT

Search & Find

Find it here!

More Info
About Search

Search & Find

Not sure what we call some of our parts?

Search

Find with Parts Finder

last searched for: spa mini jet repair kit => Display All

Repair Adhesive Kit (for light lens)

*SORRY-NOT AVAILABLE TO ALASKA OR HAWAII RESIDENTS
This is the newest special underwater, chlorine resistant epoxy that's formulated to bond the light lens to the spa shell's thermoplastic. It is also used to repair small cracks and comes with two mixing nozzles.

*Note: This product is flammable and cannot ship by air (ie; United States Postal Priority Mail or UPS Express) but only UPS GROUND within the US.

Click on the "more Info" button for details

List Price: $43.40
Price: $36.89
Spray Foam, 2 Lb. Density, 1 Cu. Ft. Kit

Same urethane foam used at the factory. This kit is used primarily to adhere the pieces of foam insulation that were removed to repair a leak. Saving the pieces of foam and placing them back into the foam void using this kit to fossilize the foam pieces into place. Click on the "More Info" button for details.

:
Price: $75.14
Spray Foam, 2 Lb. Density, 8.75 Cu. Ft Kit

Same urethane foam used at the factory. This kit consists of an "A" & "B" compound each in a pressurized canister. Those components are mixed at the spray gun which comes with disposable tips. This kit is used to replace foam that has been removed to repair a leak. Click on the "More Info" button for details.

:
Price: $566.44
Large Crack Repair Mixing Kit

This mixing kit (adhesive sold separately) includes brushes, disposable mixing buckets, fiberglass and instructions to repair large cracks on the backside of the spa shell on Hot Spring, Tiger River, Hot Spot and Solana spas. The adhesive, 71024, is sold separately due to its short shelf life (6 months).

:
Price: $84.75
KIT,REPAIR,MMA ST-MARBLE

This is a surface repair kit for marble colored spa shells.  This repair should be done by a qualified service professional.  Most of the time it's best to hire an acrylic repair company to do this repair.

Price: $154.62
15 amp Mini Breaker, Hot Spot, 1993-1998 (Generic)

GENERIC (This does not come from Hot Spring factory and does not have a one year warranty)

This generic replacement 15amp Mini Breaker is used to replace the original mini breaker located on the control box on all 1993-1998 Hot Spot spa models. The reset button is identified by the number 15 located on the round portion of the reset button.

Price: $49.23
Wish List
Crack Repair Adhesive, QT *LITE*

This two part adhesive is for large crack repairs on a Hot Spring, Tiger River, Hot Spot or Solana spas. It is used in conjunction with the Large Crack Repair Mixing Kit and various cosmetic surface touch up kits. This adhesive is formulated to adhere to the backside of the ABS Substrate on the above mentioned spa brands. This item has a 6 month shelf life and is typically not stocked. We ship within 3 business days of your order.

:
Price: $67.58
Tiger River Bartop Crack Repair

Crack repair kit used to repair crack in bar top and reinforce the area in order to prevent cracks from happening in the future on Tiger River spas made in late 1990's and early 2000's.

Price: $54.66
KIT REP,AQUA Q+,GRWKS9542

Surface repair kit recommended for qualified service techs only.

Price: $116.03
KIT REP,SUR,SAND Q+,GRWKS9583

This is a surface repair kit for sand quarite colored spa shells.  This repair should be done by a qualified service professional.  Most of the time it's best to hire an acrylic repair company to do this repair.

Price: $116.03
KIT REP,SUR,BLUE Q,GRWKS9566

This is a surface repair kit for blue quarite colored spa shells.  This repair should be done by a qualified service professional.  Most of the time it's best to hire an acrylic repair company to do this repair.

Price: $116.03
KIT REP,SUR,ASH Q+,GRWKS9553

This is a surface repair kit for ash quarite colored spa shells.  This repair should be done by a qualified service professional.  Most of the time it's best to hire an acrylic repair company to do this repair.

Price: $116.03
KIT, MINI JET BODY

This is the rear portion of the Precision Jets used in Hotspring and Tiger River spas from 3rd Quarter 2003 through 2005.  It has the barbed fitting for the air line to connect and a 1/2" female slip fitting for a PVC water line connection.

Price: $30.60
KIT, O-RING 121 MINI JET FRONT
Price: $7.57
Bartop Crack Repair, Hot Spring

Crack repair kit used to heal a crack 6" or less. This kit requires a working temperature of above 50 degrees for at least twenty four hours during the curing process of the epoxy.

Instructions

:
Price: $95.20
KIT, HSS REPAIR AQUA/ARISTECH
Price: $119.13
Surface Repair Kit, Blue Granite

This kit is used to make cosmetic surface repairs on the blue quarite (granite looking speckled color) on Hot Spring, Tiger River, Hot Spot and Solana spas. This kit can only be used in temperatures above 70 degrees.

Price: $119.13
KIT, HSS REPAIR SAND ARISTECH
Price: $119.13
KIT, HSS REPAIR AQUA LUCITE
Price: $119.13
KIT, HSS REPAIR BLUE LUCITE
Price: $119.13
KIT, HSS REPAIR SAND LUCITE
Price: $119.13
KIT,REPAIR,MMA COPPER
Price: $154.62
KIT,REPAIR,MMA CHAMP
Price: $154.62
KIT,REPAIR,MMA PEARL ARI
Price: $200.35
KIT,REPAIR,MMA PEARL LUC
Price: $154.62
KIT,REPAIR,MMA AZURE
Price: $154.62
KIT,REPAIR,MMA SILVER
Price: $154.62
KIT,REPAIR,MMA S MIST OPAL
Price: $154.62
KIT,REPAIR,MMA CHAMP OPAL
Price: $154.62
KIT,CAL BLSTR REPAIR CAR BLUE
Price: $116.03
Mini Jet Spinner Nozzle, Warm Gray

(Ref. #7) One of two parts needed to convert a mini-jet to a spinning mini jet. The second piece needed is the Mini Jet Spinner Face (73847) in the warm gray color. This part is for all 2006-2007 Hot Spring and Tiger River spa models.

Price: $8.66
KIT REP,SUR,PERL,MMAWKS20800

This is a surface repair kit for pearl colored spa shells.  This repair should be done by a qualified service professional.  Most of the time it's best to hire an acrylic repair company to do this repair.

Price: $215.82
KIT REP,SUR,PLAT,MMAWKS6140

This is a surface repair kit for platinum colored spa shells.  This repair should be done by a qualified service professional.  Most of the time it's best to hire an acrylic repair company to do this repair.

Price: $222.36
KIT REP,SUR,SAPH BL,MMAWKS6139

This is a surface repair kit for sapphire colored spa shells.  This repair should be done by a qualified service professional.  Most of the time it's best to hire an acrylic repair company to do this repair.

Price: $222.36
KIT RE,SUR,GRAPHITE,GRWKS9802

This is a surface repair kit for graphite colored spa shells.  This repair should be done by a qualified service professional.  Most of the time it's best to hire an acrylic repair company to do this repair.

Price: $145.01
Barbed Fitting, 3/4" Elbow Repair

This barbed fitting is 1/2" slip on one end and 3/4" barbed on the other. It is used to repair a broken 1/2" elbow that comes out of the floor of the Hot Spring equipment compartment and nineties into the circulation pump. This fitting will glue into the elbow to provide a place for the 3/4" vinyl tubing to connect from it to the circulation pump.

List Price: $4.20
Price: $3.57
15 amp Mini Breaker, Hot Spot, 1993-1998

This 15amp Mini Breaker is located on the control box on all 1993-1998 Hot Spot spa models. This reset button is identified by the number 15 located on the round portion of the reset button.

Price: $87.55
Wish List
JET,DUO BLASTER DIRECT INSERT

Direct insert for the mini blaster jet used on the 2003-2005 Hot Spot spa models.

Price: $2.38
Compression Fitting O-ring, for 1-1/2" Union

1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps.  This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump.  No teflon tape is needed for the jet pump connections.

List Price: $1.30
Price: $1.11
Face, Precision Jet-White

White face for the Precision Jet (mini-jet) for all white 1996-2003 Hot Spring spa models. This part just snaps onto the wallfitting.  These are the faces for the small, fixed direction jets, usually located in clusters of 4 or 10 jets.

List Price: $2.70
Price: $2.30
Face, Precision Jet-Gray

(Ref. #1) Gray face for the Precision Jet (mini-jet) for all 1996-2003 Hot Spring & Tiger River spas, 2000-2003 Solana spas and 2000-2002 Hot Spot spa models. This part just snaps onto the wall fitting nut.

List Price: $6.20
Price: $5.27
Face, Precision Jet-Taupe

Taupe face for the Precision Jet (mini-jet) for 2002-2003 Hot Spring ILE, 2003 Hot Spring Vanguard & Grandee, 2000-2003 Solana TX and 2003 Solana RX & SX spa models. This part just snaps onto the wallfitting.

List Price: $1.50
Price: $1.28
Coupling, Barbed, 3/4" x 3/4"

This is a barbed coupling used to splice together 3/4" vinyl tubing used in Hot Spring & Tiger River, Limelight, Hot Spot and Solana spas.  This fitting would normally be used in to repair a broken line.

List Price: $3.80
Price: $3.23
Light Lens Retrofit Kit, Gray, '92-'99 Tiger River spas

Replacement gray colored light lens for all 1992-1999 Tiger River spa models regardless of the spa shell color. You can also use the 71833. The newest special underwater, chlorine resistant epoxy that's formulated to bond the light lens to the spa shell's thermoplastic, can be added below.

:
List Price: $87.20
Price: $74.12
Light Lens Retrofit Kit, White, '89-'99 Hot Spring

Replaces the original lens found on all white colored 1989-1999 Hot Spring spa models with this retro-fit lens. The newest special underwater, chlorine resistant epoxy that's formulated to bond the light lens to the spa shell's thermoplastic, can be added below.

:
List Price: $87.20
Price: $74.12
Light Lens Retrofit Kit, Gray, '96-'99 Hot Spring

Replacement lens for non-white colored spa shells on 1996-1999 Hot Spring spas. The newest special underwater, chlorine resistant epoxy that's formulated to bond the light lens to the spa shell's thermoplastic, can be added below. Click on the "More Info" button for details.

:
List Price: $87.20
Price: $74.12
Adhesive (Dp 601 Ns)

This is Scotch Guard Urethane Adhesive used to repair missing slats from all spa cabinets.  Due to the high price of this product, and special application gun needed to use it, we recommend the use of Power Grab Heavy Duty Construction Adhesive instead.  It's available at your local hardware store for under $10 a tube, and is available in either a pressurized tube, or a tube that can be used with a normal caulking gun.

Price: $104.55
Precision Jet Body, 2006-current

Precision Jet Body (mini-jet) for all Hot Spring, Tiger River, Solana and Hot Spot spas from 2006 forward.

Price: $7.06
Mini Jet Spinner Face, Cool Gray

This cool gray colored spinner converts a standard Precision Jet into a rotating jet on all 2006 forward Hot Spring, Tiger River, Solana and Hot Spot spas.

List Price: $10.70
Price: $9.10
Mini Jet Spinner Nozzle, Cool Gray
Price: This item is not available
Not Available
Luran Repair, Hot Spot
Price: $6.60
 

This jet is used in all 2003 to current Hot Spot model spas that include Hydromassage jets.  The jet has two nozzles and spins when water flows through it, to create a nice massaging action.

Price: $14.00
Heater Replacement Kit, Hot Spring, 1/2" Ports-115V., 1980-1989

Replacement heater kit for all 115 volt Hot Spring spa models manufactured from 1980-1989. This heater has 1/2" inlet and outlet ports found on the Hot Spring Classic, Home Spa, Indoor/Outdoor, Personal Spa, Jetsetter, Prodigy and Sovereign spa models.  Click on the picture or the "More Info" button for details.

:
Price: $296.81
Heater Replacement Kit, Hot Spring, 115V., 1990-1994

Replacement heater kit for all 115 volt Hot Spring spa models manufactured from 1990-1994  which includes the Hot Spring Classic, Jetsetter, Prodigy & Sovereign spa models. Click on the picture or the "More Info" button for details.

Price: $296.81
Water Valve Diverter Kit, Hot Spring/Tiger River, Pre-1994

This diverter valve is located under the diverter lever on the top lip of the spa. Its purpose is to divert water to different jet combination's when you rotate the lever or dial. Replacement is necessary only if the valve lever becomes too difficult to turn, the handle breaks off the top of this valve or it begins leaking. This is the replacement valve kit for pre-1994 Hot Spring Classic, Grandee, Highlife, Indoor/Outdoor, Jetsetter, Prodigy and Sovereign spa models. Also used on the Tiger River 1992-1993 Khyber, Manora and Tondi spa models.

List Price: $39.80
Price: $33.83
Lens Kit- Blue & Red, All Hot Spot & Solana Spas

Colored lenses (1-blue & 1-red) snap over the existing light lens inside the spa. Designed for all 1993-2002 Hot Spot spas and all 2000-2005 Solana spa models.

List Price: $6.40
Price: $5.44
Lens Kit- Purple & Green, All Hot Spot & Solana Spas

Colored lenses (1-purple & 1-green) snap over the existing light lens inside the spa. Designed for all 1993-2002 Hot Spot spas and all 2000-2005 Solana spa models.

List Price: $6.40
Price: $5.44
Freshwater Mounting Kit, 1995-1996 Classic only

This mounting kit enables the Freshwater Ozonator to mount onto the equipment compartment floor of a 1995-1995 Hot Spring Classic.

Price: This item is not available
Not Available
Wetend Kit, 36070
Item #: 36070-WETEND

Wet end kit for the 36070 pump. The 36070 pump (36070-BYP) was used on the Hot Spring 1993-1996 Classic, 1993-1995 Grandee and Sovereign spa models. This kit comes pre-assembled for shipping purposes. It needs to be dis-assembled then each piece is installed in sequential order. 

Price: $361.19
Water Diverter Valve Kit, 2-Position, Hot Spot Sorrento

This 2-position (3 and 9 o'clock) Diverter Valve Kit is located under the diverter lever on the top lip of the spa. Its purpose is to divert water to different jet combination's when you rotate the lever from 3 o'clock to 9 o'clock. Replacement is necessary only if the valve lever becomes too difficult to turn, the handle breaks off the top of this valve or it begins leaking. This is the correct kit for all Hot Spot Sorrento spa models.

Price: $9.19
Heaterbody Kit, Hot Spring, 230v., 1984-1994

Replacement heater housing kit for the 1987-1994 230volt Hot Spring Grandee & Highlife, 1984-1994 230volt Classic (IH & FH) and 1984-1994 230volt Indoor/Outdoor & Sovereign (IH) spa models. Click the "More Info" button for details.

List Price: $261.40
Price: $222.19
CABOSIL KIT
Item #: 70296

Price: $2.38
Warning Sign Kit
Item #: 70798

Warning / Safety Sign for all Watkins Manufacturing Spa Models.  This sign should be permanently posted near the spa where it is visible to all users of the spa.

Price: $2.38
Capacitor Relay Upgrade Kit-Hot Spot Z

This upgrade kit is needed for the Hot Spot Z (round) model prior to Z-240133 (2nd quarter 1994) and comes with instructions for replacement from Z-330001 (3rd qtr 1993) to Z-240133 (2nd qtr 1994). 

Note: Factory photo shows that this includes a resistor which it does not.

List Price: $76.20
Price: $64.77
Adapter Kit, SilentFlo 5000, Pre-1990 Hot Spring

Used to convert 1/2" plumbing to 3/4" on pre-1990 Hot Springs only This kit contains all the fittings & tubing necessary to convert your 1/2" plumbing to 3/4" when replacing the older style 1/2" inlet/outlet Hot Spring circulating pumps to the new SilentFlo E5 replacement circulator pumps.

List Price: $40.70
Price: $34.60
Smart Jet Water Valve Diverter Kit, Hot Spring/Tiger River, '94-'97

This SmartJet valve (ie: diverter valve) is located under the SmartJet lever on the top lip of the spa. The purpose of the Smart Jet valve is to divert water to different jet combination's when you rotate the lever/dial. Replacement is necessary only if the valve lever becomes too difficult to turn, the handle breaks off the top of this valve or it begins leaking. This is the replacement SmartJet valve kit for 1994-1997 Hot Spring Classic, Grandee, Jetsetter, Prodigy and Sovereign, the 1995-1996 Summit, 1994-1996 Highlife and 1995-1997 Landmark spa models. Also used on the Tiger River 1994-1996 Khyber, Manora, Tondi and the 1997 Bengal, Siberian and Sumatran spa models. Click on the picture for more information.

List Price: $30.50
Price: $25.93
Bulb, Retrofit Kit, Freshwater 1

OBSOLETE
Ultraviolet replacement bulb for the original wall mounted FreshWater Ozone Purification System.

Price: This item is not available
Not Available
Skimmer Weir Kit, Hot Spring, 1993-Current, Cool Gray

This cool gray colored guide body kit is used to replace a warped or broken skimmer weir guides in a blue or jade colored 1993-current Hot Spring spa.

( 4 ) on the 1993-current Hot Spring Filter Compartment page

Price: $22.44
Shaft Seal Kit, Wavemaster

The shaft seal kit is used to prevent water leaking from around the rotating pump shaft. This seal kit is used on most of the Wavemaster jet pumps including the Wavemaster 3000, 4000, 5000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000, 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 2), 9000 (ver. 3), and 9200 jet pumps.

List Price: $18.90
Price: $16.07
WOOD CUT-OUT KIT, H '98

This wood kit is used for the section of the front of the spa where the control panel is located.  The wood is precut to allow the installation of the control panel.  This kit was used on the Hot Springs Prodigy in 1998 to 1999 and is made of 100% kiln dried redwood.

Price: $62.39
Wood Cut Out Kit,J 1998

This Redwood Kit has the opening cut-out for the Control Panel on all Hot Spring Jetsetter spas manufactured in 1998 -1999.  Jetsetter spa Serial #'s J181001 through J4A9999.

Price: $79.39
Smart Jet Water Diverter Valve Kit, 2-Position

This 2-position (3 and 9 o'clock) Smart Jet Water Diverter Valve Kit is located under the Smart Jet lever on the top lip of the spa. Its purpose is to divert water to different jet combination's when you rotate the lever from 3 o'clock to 9 o'clock. Replacement is necessary only if the valve lever becomes too difficult to turn, the handle breaks off the top of this valve or it begins leaking. Click on "More Info" button for details.

Watch Installation Video

List Price: $20.60
Price: $17.51
Smart Jet Water Diverter Valve Kit, Hot Spring/Tiger River, 4-Position, '98-'07

This Smart Jet 4-position (3, 6, 9 and 12 o'clock)Water Diverter Valve is located under the Smart Jet lever/dial on the top lip of the spa. Its purpose is to divert water to different jet combination's when you rotate the lever. Replacement is necessary only if the valve lever becomes too difficult to turn, the handle breaks off the top of this valve or it begins leaking. Click on the "More Info" button for details.

Watch Installation Video

List Price: $22.30
Price: $18.96
Butterdish Kit, Hot Spring Aux Panel, 1998-2003

This butterdish houses the Auxiliary Control Panels in all 1998-2003 Hot Spring models (except Jetsetter). For 2004 forward spas you'll need the 73232. The butter dish is rarely replaced. Replacement requires removing the exterior synthetic wood siding then digging through the foam insulation. Not fun!

Price: $12.67
Button Kit, Light, 98 Hot Spring Panel

OBSOLETE

Replace complete panel.  There are two versions of the panel available.

Use 71510 if your spa has one jet pump.

Use 71509 if your spa has two jet pumps.

Price: This item is not available
Not Available
Button Kit, 1-Jet, 98 Hot Spring Panel
Price: This item is not available
Not Available
Button Kit, 2-Pump, 98 Hot Spring Panel

OBSOLETE-Order complete panel 71509

Price: This item is not available
Not Available
Button Kit, Jet Cleanup, 98 Hot Spring

OBSOLETE

This button is no longer available separately.  Replace complete panel bezel.

Use 71509 to replace the complete control panel bezel.
Price: This item is not available
Not Available
Kit, Ozone Jet, Hot Spot

This Ozone Jet fitting is used on the Hot Spot Sorrento and Mallorca model spas from 2003 to 2009.  It is located in the foot well of the spa. The jet delivers Ozone to the spa when the optional Freshwater III Ozonator has been installed. 

Price: $9.87
Cover Lock Kit, 4 Sets (Black)

Four sets of black cover locks. This kit has both the female end (mounts onto the spa) and the male end (attaches to the cover strap) and the mounting screws. All four of these sets come standard in this kit. This coverlock kit replaces all other colors and styles for all Hot Spring, Tiger River, Hot Spot and Solana spa models.

List Price: $13.60
Price: $11.56
Heater Adapter Kit, Replacing '95-'96 No-Fault 1500 or 5500

Use this kit if you're replacing the original No-Fault® 5500 or No Fault 1500 Cartridge Style heater on a 1995-1996 Hot Spring or Tiger River spa with the new PDR Titanium Heater and is cheaper when combined with that heater. Click the "More Info" button for details.

List Price: $50.70
Price: $43.10
Lever & Bezel Kit, Gray 4-Pos., Hot Spring/Tiger River, 1998-2003

OBSOLETE-Use 73363

This kit consists of the Smart Jet lever and bezel in gray for the 1998-2003 Hot Spring & Tiger River spa models that utilize the 4 position Smart Jet diverter valve.

Price: This item is not available
Not Available
Lever & Bezel Kit, 1998-2008, Hot Spring

OBSOLETE
This kit consists of the Smart Jet lever and bezel in white/green for the white colored interior 1998-2008 Hot Spring spa models. Use the new style lever & bezel Kit 73361.

Price: This item is not available
Not Available
Lever & Bezel Kit, Gray 2-Pos., Hot Spring/Tiger River, 1998-2003

OBSOLETE
This kit consists of the Smart Jet lever and bezel in cool gray for the 1998-2003 Hot Spring & Tiger River spa models that utilize the 2 position Smart Jet Diverter Valve. This item has been replaced by the new style lever & bezel Kit 73360.

Price: This item is not available
Not Available
Everwood Control Panel Trim Kit

Trim kit of Everwood (synthetic wood) pieces that surround the control panel bezel on a third quarter 1998-2000 Hot Spring Grandee and the control panel bezel on a 1999-2001 Sovereign. 

Price: $86.45
Directional Jet Kit, (White), 1997-current

(Ref. #5a) White color factory replacement directional jet for all 1997-current Hot Spring, all 1997-2002 Hot Spot models. This white color directional jet is used only in white matte (endurol surface-not glossy) spas. This jet has been redesigned from the "push in style" shown to a "screw in style". This redesign will prevent it from detaching from the holder unexpectedly. The included instructions are clear and installing this replacement takes seconds.

Click here to match the correct jet color to your spa.

List Price: $7.10
Price: $6.04
Directional Jet Kit, Cool Gray, 1997-current

Cool Gray color factory replacement directional jet for all 1997-current Hot Spring & Tiger River spas, all 1997-2002 Hot Spot models and 2003-current Solana spas.

Click here to match the correct jet color to your spa.

Price: $6.49
Cable Retrofit Kit

The cable retrofit kit is used on the third through fourth quarter 1996 Hot Spring Landmark & Summit spas when upgrading from the original discontinued control box with the newer 1997 IQ2000 control box . The upgraded 71382 control box needs this cable which provides a port for the flow switch to plug in to. This cable is only necessary if the flow switch is still being utilized with the original No Fault 5500 cartridge style heater.

Price: $30.35
Skimmer Weir Kit, Hot Spring, 2000-current-Cool Gray

Used on the silver marble, jade & blue colored 2000-current Hot Spring spas. Use this to replace a warped, discolored or broken skimmer.

( 1 ) on the 2000-current Hot Spring Filter Compartment page

Price: $93.67
Skimmer Weir Kit, Hot Spring, 2000-current-White

Used on the white colored 2000-current Hot Spring spas. Use this to replace a warped, discolored or broken skimmer.

( 1 ) on the 2000-current Hot Spring Filter Compartment page

Price: $93.50
Wood Surround Kit, Control Panel, Hot Spring Jetsetter, 00-01

Unstained redwood trim kit that surrounds the front control panel, above the equipment door, on the 1st quarter 2000 to 4th quarter 2001 Hot Spring Jetsetter.


Price: $105.91
Wood Surround Kit, Control Panel, Hot Spring Prodigy, 00-01

Unstained redwood trim kit that surrounds the front control panel, above the equipment door, on the 1st quarter 2000 to 4th quarter 2001 Hot Spring Prodigy.

Price: $59.42
Directional Jet Kit, Taupe, 2002-current

(Ref. #5d) Taupe color factory replacement directional jet for 2002-2003 champagne colored Hot Spring ILE Limited Edition Sovereign, Grandee and Vanguard models and 1997-2002 Hot Spot models and 2003-2004 Solana RX & Sx models.

Click here to match the correct jet color to your spa.

List Price: $22.00
Price: $18.70
KIT, WOOD SLAT, (002001)

Slat, Flat Edge, Natural Redwood.  Used on some 2003-Current Hot Spot model spas.  Part may need to be trimmed to length before installing.

Price: $20.40
KIT, WOOD SLAT, (002066)

Slat, Flat, Natural Redwood used on some 2003 - Current Hot Spring spa models.  Part may need to be trimmed to length before installing.

Price: $6.38
KIT, WOOD SLAT, CORNER HS (002067)

Slat, Corner, Natural Redwood, used on some 2003 - Current Hot Spring spa models.  There are two (2) slats used for each corner along with one (1) slat #72132.

Price: $20.66
KIT, WOOD SLAT, CORNER "T" (002068)

Slat, Corner "T", Natural Redwood, used on some 2003-Current Hot Spot spa models.  Part may need trimmed to length before installation.  There is one (1) "T" Slat for each corner along with two (2) #72131 slats.

Price: $20.66
KIT, NUT/WALLFIT DIV VALVE '01
Price: $10.71
KIT TEE 2 DIV VALVE 01
Price: $10.71
Tubing Kit, Freshwater III Ozonator-1/4" Tygon/Kynar

This 1/4" Kynar/Tygon ozone resistant tubing kit comes standard with the Freshwater III Ozonators and is also the current replacement tubing for all Freshwater III units from 2001 to now.

List Price: $26.80
Price: $22.78

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »