Free shipping on orders over $99 (Some exclusions apply)
(805)541-9000 Mon-Fri 6:30am - 5pm PDT

Freshwater High Output Ozonator Parts

UV bulbs, transformers, injectors, tubing and more!

Accessory Ozonators
Find with Parts Finder

Air Filter, Freshwater Ozone

OBSOLETE
Foam filter for the Freshwater 1 ozonator.

Price: Not available
Not Available
Ballast Replacement, Freshwater 1 Ozone

OBSOLETE
This ballast is located inside the original exterior wall mounted Freshwater Ozonator.

Price: Not available
Not Available
Bulb, Retrofit Kit, Freshwater 1

OBSOLETE
Ultraviolet replacement bulb for the original wall mounted FreshWater Ozone Purification System.

Price: Not available
Not Available
Check Valve (Ozone) Freshwater I

OBSOLETE USE 1044101
This 3/16" OD check valve was used on the original exterior wall mounted Freshwater Ozonator. It was positioned just after the injector. Its purpose was to prevent the spa from siphoning out through the Kynar tubing in the unlikely event the spa's power was interrupted and the wall mounted Freshwater Ozonator was mounted below the waterline.

Price: Not available
Not Available
Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.

Over time an ozonator check valve will breakdown under the harsh conditions of ozone. Our OEM check valves have a special diaphragm (Viton) that enables them to last longer than rubber. Rubber diaphragms last about a month before the rubber becomes hard. Click on the "More Info" button for details.

Watch Video

:
Price: $17.46
Cord Plug, Freshwater Ozone, 8ft, Gray

OBSOLETE
This power cord with a plug at the end was used on the original Freshwater Ozonator exterior wall mounted unit.

Price: Not available
Not Available
Flow Meter, Freshwater 1

OBSOLETE
This flow meter instrument was used on the first Freshwater Ozonator exterior wall mounted unit. It had a small ball inside that would float at various levels to indicate the flow of ozone to the spa.

Price: Not available
Not Available
Injector, Freshwater Ozone, Black

The injector fits in-line after the Silentflo 5000 (discharge side and after the heater). This Kynar plastic "venturi" injector is ozone resistant and is used with the Freshwater III High Output Ozonator by Watkins manufacturing. Also replaces the 34897 injector used in conjunction with the Freshwater 1 Ozonator. Click on the picture or "More Info" button for details.

Watch Video

Price: $25.07
Injector, Freshwater Ozone, Red

This red ozone injector was used with the Freshwater I & Freshwater III (for Hot Spot & Solana spas). It designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system. Click the "More Info" button for details.

Price: $23.37
Ozone Injector, Freshwater 1

This red ozone injector is used in conjunction with the Freshwater I Ozonator. It designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system.

Price: $45.84
Strain Relief, Control Box, 3/8"

This strain relief is used to secure the circ pump and ozonator's power cord to the bottom of the IQ Control boxes. The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down.

Price: $1.41
Tubing, 1/4in Kynar( Extruded) 25Ft

OBSOLETE
This Kynar tubing was used on the Freshwater High Output Ozonators. It ran from the exterior mounted unit to an injector located in the equipment compartment. The ozone resistant Kynar tubing ran inside of a larger diameter polypropylene tube for protection.

Price: Not available
Not Available
Tubing, Silicone, Freshwater Ozone

OBSOLETE  use 72228
This silicone tube is connected from the ozone injector to the check valve, and then from the check valve to the Kynar tubing. It is part of the installation kit of the original Freshwater Ozonator exterior wall mounted unit.

Price: Not available
Not Available