Free shipping on orders over $99 (Some exclusions apply)
(805)541-9000 Mon-Fri 6:30am - 5pm PDT

Hot Spring 115volt Heater Replacement Parts

1980-1994 Hot Springs heater elements, gaskets, housing and related parts.

Factory replacement parts for the 115 volt heater (aka 110 volt) used in the Hot Spring Classic, Home Spa, Personal Spa, Jetsetter, Prodigy, Indoor-Outdoor and Sovereign spa models prior to 1995.

1980-1994 Hot Spring heater (110 volt models)

Heater Cord Adapter, 115Volt, Pre-1988 Hot Spring

(Ref. #11) The heater cord adapter allows one to plug the current replacement heater element into the pre-1988 Hot Spring control box receptacle. The original control box heater receptacles (standard household style) will not accept the current plug configuration (square) used on the 31255 replacement heater elements. Click the "More Info" button for details.

Price: Not available
Not Available
Heater Element, Hot Spring, 115v 1.5kW, Pre-1995
Item #: 31255
compatible
Check Country
Compatiblity

GOOD NEWS---Heaters are here!!

 

What's included: Heater element w/ power cord, gasket and o-ring.

This 1500 watt heater element is the replacement for all 1980-1994 Hot Spring spa models that operated on 115volts. This heater element, located inside of a stainless steel cylinder style housing, is an immersion type heater. If your spa is older than 1989, you will need the cord adapter (30070) or splice in your old cord end onto this new element. Click the "More Info" button for details.

:
List Price: $254.00
Price: $199.99
Heater Replacement Kit, Hot Spring, 1/2" Ports-115V., 1980-1989
Item #: 20286.50-BYP
compatible
Check Country
Compatiblity

Replacement heater kit for all 115 volt Hot Spring spa models manufactured from 1980-1989. This heater has 1/2" inlet and outlet ports found on the Hot Spring Classic, Home Spa, Indoor/Outdoor, Personal Spa, Jetsetter, Prodigy and Sovereign spa models.  Click on the picture or the "More Info" button for details.

Price: $399.99
Heater Replacement Kit, Hot Spring, 115V., 1990-1994
Item #: 20286.75-BYP
compatible
Check Country
Compatiblity

Replacement heater kit for all 115 volt Hot Spring spa models manufactured from 1990-1994  which includes the Hot Spring Classic, Jetsetter, Prodigy & Sovereign spa models. Click on the picture or the "More Info" button for details.

Price: $399.99
Heaterbody, Hot Spring, 115V., 1/2" Ports, 1980-1989

(Ref. #3a) Stainless steel heater housings with 1/2 inch ports were used on all 1980-1989 115v. Hot Spring spa models. The housing (heater body) is tubular in shape and has three intake/discharge ports. The two larger ports (1/2"), located on the end of the housing, are used to circulate water through the housing via the small, low flow circulation pumps. Click the "More Info" button for details.

List Price: $153.84
Price: $130.76
Heaterbody, Hot Spring, 115V., 3/4" Ports, 1990-1994

(Ref. #3b) Stainless steel heater housing with two 3/4" ports and one 1/4" ports was used on all 1990-1994 115volt Hot Spring spa models. The housing (heater body) is tubular in shape and has three intake/discharge ports. The two larger ports (3/4"), located on the end of the housing, are used to circulate water through the housing via the small, low flow circulation pump . Click on the "More Info" button for details.

List Price: $153.84
Price: $130.76
Insulation, Heaterbody 115V

(Ref. #6) This insulation minimizes the heat loss through the heater housing.  The insulation is wrapped around the stainless steel heater body used in 115 volt spas made from 1980 to 1994.

Price: $28.03
Nut, Hex #10-24in SS

(Ref. #7) Used on the 1980-1994 115volt Hot Spring heaters in conjunction with the stainless steel screw (30348) to secure the heater element to the heater body.

Price: $1.18
O-Ring, Heaterbody 115V 1.5Kw

(Ref. #5) This o-ring is used to seal the heater element (part#31255) into the heater housing(s) (part# 10475 or #30786)

Price: $1.87
Retainer Gasket, Heaterbody 115V

(Ref. #4) The Retainer is used to hold the Heaterbody O-ring( part#31212) into place on Hot Spring models only.

Price: $3.05
Screw, #10-24 X 3/4in SS

(Ref. #1) Stainless steel screw mostly used on the 1980-1994 115volt Hot Spring heaters to secure the heater element to the heater body.  Four of these are used with each heater.

Price: $1.18
Spring Clamp, 1/2" (.645-.828)

1/2" spring clamp for securing 1/2" vinyl tubing to components.

Note: Wear eye protection when squeezing these little rascals. Service techs typically use either needle nose pliers are hose clamp pliers to squeeze then slide this spring clamp onto the vinyl tubing.

Price: $1.41
Spring Clamp, 3/4" (.97-1-.18)

3/4" spring clamp (aka wire clamp) is used to secure the 3/4 inch vinyl tubing (70315) to various components.

Note: Wear eye protection when squeezing these little rascals. Service techs typically use either needle nose pliers or hose clamp pliers to squeeze then slide this spring clamp onto the vinyl tubing.

Price: $0.82
Vinyl Tubing, Thick Walled, 3/4" Dia. (ID) x 36"

3/4" inside diameter (ID) by 36" long section of specially made thick walled, clear vinyl tubing. This thick walled tubing will stand up to the harsh chlorinated spa environment for years to come. This is the size of tubing that connects the circulation pump to the heater in all Hot Spring and Tiger River spas from 1990-2008. Use the 1/2" tubing for 1982-1989 Hot Spring spa models.

3/4" Vinyl Tubing
1/2" Vinyl Tubing
3/8" Vinyl Tubing
1/4" Vinyl Tubing

Price: $11.76