Free shipping on orders over $99 (Some exclusions apply)
(805)541-9000 Mon-Fri 6:30am - 5pm PDT

Wallfitting, Rear, Precision Jet

Item #: 36057

Wallfitting, Rear, Precision Jet
  (Enlarge)  

Description

(Ref. #5) Wall fitting (jet body) is installed behind the spa shell for the Precision Jet. Both water and air lines feed this fitting. The wall fitting nut (not included) inserts through the front of the spa shell and screws into this fitting with an o-ring positioned between the nut and the spa shell. The barbed fitting is 3/8".

Check Serial Number Compatibility

Want it delivered Tuesday, October 22nd ?
Order it in the next 03 Hours and 19 Minutes ,
and choose "UPS Next Day Air" Shipping at checkout (US only)

Related Items

Precision Jet Elbow

This elbow is used to glue onto the rear of the Precision Jet Body. This elbow is an odd size and is not available at the local hardware store.

Price: $3.05
Spring Clamp, 3/8"

3/8" spring clamp (aka wire clamp) is used to secure the 3/8 inch vinyl tubing to various components.

Note: Wear eye protection when squeezing these little rascals. Service techs typically use either needle nose pliers are hose clamp pliers to squeeze then slide this spring clamp onto the vinyl tubing.

Price: $1.18
Tee, Precision Jet

This tee is used to glue onto the rear of the Precision Jet Body and provides a 1/2" connection on either side of the tee. This tee is not available at the local hardware store.

Price: $2.34
Vinyl Tubing, Thick Walled, 3/8" Dia. (ID) x 36"

3/8" inside diameter (ID) by 36" long section of specially made thick walled, clear vinyl tubing. This thick walled tubing will stand up to the harsh chlorinated spa environment for years to come.

3/4" Vinyl Tubing
1/2" Vinyl Tubing
3/8" Vinyl Tubing
1/4" Vinyl Tubing

Price: $5.48


RECENTLY VIEWED