Free shipping* (Some exclusions apply)
(805)541-9000 Mon-Fri 6:30am - 5pm PDT

Wavemaster® 6000 parts

Parts for Watkins Wavemaster® 6000 Jet Pump

This WavemasterŪ 6000 one and a half horsepower two speed jet pump was used on the 2000-2002 Hot Spot SLXtra and 2003-current Solana SX spa models. The two speed function employs the low speed for automatic filtration and high speed for hydrotherapy. The jet pump is designed for 115v. operation for the convenience of a Plug 'N Play environment.

Wavemaster 6000 Exploded Illustration
Find with Parts Finder Show compatibility chart Hide compatibility chart
Wavemaster® 6000, 1 HP/ 2-Speed pump used in the following spas:
MODEL YEAR Serial # Range
SLXtra (square) 2001-2002 W 1C1001 - W 4D9999
MODEL YEAR Serial # Range
SX 2003-current SX 1E1001 - current

Technical Specs:
13.8 amp/115 Volts AC, 1.5 hp in high speed or 3.8 amp/115 Volt AC in low speed Old PN: 38944, 72030


Barbed Fitting w/ o-ring, Wavemaster & Starite

Hot Spring, Hot Spot & Solana spas only
This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple. The function of this 32267 nipple is to provide a place for the 1/4" vinyl tube to connect onto the suction side of the jet pump which in turn helps drain the jet pumps water when you drain the spa. Also helps prevent and "Air lock" in the Hot Springs baby circulation pumps (Silentflo) plumbing.

Price: $3.28
Compression Fitting, 2" with O-Ring

This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling. It is found on the suction side of most Wavemaster® Jet Pumps. Other compression fittings are the # 71038) and # 71037.

Price: $15.06
Drain Plug, Wavemaster

This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline. Click on the picture or the "More Info" button for details.

Price: $1.87
Exhaust Hose, Wavemaster

This exhaust hose connects onto the rear of the jet pumps shroud (if equipped) to discharge hot air from the jet pump motor. This method of cooling the jet pump insures a longer lifespan of the pumps motor.

Price: $12.57
Impeller, Wavemaster 6000

GECKO MODEL IMPELLER

Replacement impeller for the Watkins Wavemaster 6000 jet pump. This impeller screws onto the pump motor's threaded shaft with regular right hand threads. Click on the "More Info" button for details.

**If your pump has vendor number of "3861" or is a PowerRite or Vico Jet pump, WE DO NOT HAVE REPLACEMENT PARTS. If your Jet pump is an LX jet pump (Vendor Code 3536) the complete wet end must be purchased. Please call our techs for further information and help in finding the correct parts. 

Price: $37.51
Mounting Bolt Washer, Wavemaster

Stainless steel washer used with the bolts that secure a pump to the pump stand and the pump stand to the floor of the equipment compartment.

(12) on the Wavemaster 4000 parts page
(12) on the Wavemaster 6000 parts page
(11) on the Wavemaster 7000 (ver. 3) parts page
(11) on the Wavemaster 8000 (ver. 2) parts page
(17) on the Starite 1Hp parts page
(17) on the Starite 2Hp parts

Price: $1.30
Mounting Bolt, Wavemaster

1/4-20 X 1-1/4" long mounting bolt that secures the pump to the floor of the equipment compartment. Used on the Wavemaster 4000, Wavemaster 6000 and Wavemaster 7000.3 jet pumps.

Price: $1.41
Pump Shroud, Wavemaster

OBSOLETE

For Magnetek or AO Smith Century Motors Only

Replacement manifold (pump shroud) for the Watkins Wavemaster 4000, 5000, 5000 (ver.2), 6000, 7000 (ver. 3), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. This shroud attaches onto the rear of the Magnetek or AO Smith Century motor. Its purpose is to divert heated air from the motor through an exhaust hose to the exterior of the equipment compartment. Cool running jet pump motors last longer!

Price: Not available
Not Available
Shaft Seal Kit, Wavemaster

GECKO MODEL SHAFT SEAL

The shaft seal kit is used to prevent water leaking from around the rotating pump shaft. This seal kit is used on most of the Wavemaster jet pumps including the Wavemaster 3000, 4000, 5000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000, 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 2), 9000 (ver. 3), and 9200 jet pumps.

Please note:  If your pump has a vendor number of "4081" on it, then use this part. If your pump has a vendor number of "3536" on it, use part number 77363

**If the vendor number is "3861", WE DO NOT HAVE REPLACEMENT PARTS. Please order the complete pump 71699.

Price: $23.57
Volute Cover Screw, 8-32 X 5/8", Wavemaster

GECKO MODEL SCREW

This stainless steel screw is used to attach the volute cover to the volute on most Wavemaster jet pumps.

Price: $1.64
Volute Cover, Wavemaster

GECKO MODEL VOLUTE COVER

The volute suction cover is the second half of the pumps volute. This factory replacement is for the Wavemaster 4000, 6000, 7000 (ver. 3), 8000 (ver. 3), 8200, 9000 (ver. 3), 9200 jet pumps. Click on the "More Info" button for details.

Price: $40.39
Volute O-Ring, Wavemaster

GECKO MODEL O-RING

Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver. 3), 8200, 9000 (ver. 3), 9200 jet pumps.

Price: $2.57
Volute, Wavemaster

GECKO MODEL VOLUTE

This part connects onto the motor using four long hex bolts that insert through the rear of the pump motor and screw into this volute. Replacement volute for the Wavemaster 4000, 6000, 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. Clcik on the "More Info" button for details.

Price: $41.05
Wear Ring, Wavemaster

GECKO MODEL WEAR RING

Wear Ring (slinger) for the Watkins Wavemaster 4000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. Please note: This wear ring is for pumps that have a Vendor Number of "4081" printed on the pump motor. Click more info for details. 

Price: $2.57