Free shipping* (Some exclusions apply)
(805)541-9000 Mon-Fri 6:30am - 5pm PDT

Wavemaster® 8000 (ver. 2) parts

Parts for the 1997-1998 Watkins Wavemaster 8000 (ver. 2) Jet Pump

This two horsepower single speed jet pump was used only on the 1997-1998 Tiger River Siberian.

Watkins Wavemaster Jet Pump Diagram for 1997-current
Find with Parts Finder Show compatibility chart Hide compatibility chart
Wavemaster® 8000, 2HP/1-Speed pump parts for the following spas:
MODEL YEAR Serial # Range
Siberian 1997-1998 L-171001 to L-489999

Technical Specs: 8 amp/230 volt AC, 2 hp, 1 speed

Note: The volute and volute cover were redesigned in 2004 to improve the placement of the volute o-ring. Consequently, those two items are not available for pumps prior to 2004. If you need to replace the volute or volute cover then purchase the "Wet End" kit which includes the new improved design.

Old ref: 36746



1/2" Barbed Fitting, Wavemaster (Tiger River/Limelight Only)

For Tiger River and Limelight spas only
This 1/2" barbed adapter fitting is located on the front of  Wavemaster Jet Pumps on Tiger River and Limelight spas. Click on the "More Info" button for details.  Teflon tape should be used on the threads of this fitting for installation.

Price: $3.53
Barbed Fitting w/ o-ring, Wavemaster & Starite

Hot Spring, Hot Spot & Solana spas only
This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple. The function of this 32267 nipple is to provide a place for the 1/4" vinyl tube to connect onto the suction side of the jet pump which in turn helps drain the jet pumps water when you drain the spa. Also helps prevent and "Air lock" in the Hot Springs baby circulation pumps (Silentflo) plumbing.

Price: $3.28
Drain Fitting O-Ring, Wavemaster

OBSOLETE-Use drain fitting 32267 or 32267-1.
Used on the drain fitting on the front of various Wavemaster jet pumps.

Price: $0.90
Not Available
Exhaust Hose, Wavemaster

This exhaust hose connects onto the rear of the jet pumps shroud (if equipped) to discharge hot air from the jet pump motor. This method of cooling the jet pump insures a longer lifespan of the pumps motor.

Price: $12.57
Impeller, Wavemaster 2.0 Hp

Impeller for the Wavemaster 8000 (ver. 2), Wavemaster 8000 (ver. 3) and the Wavemaster 8200 jet pump. This impeller screws onto the pump motor's threaded shaft with regular right hand threads.

Watch Video

**If your pump has vendor number of "3861" or is a PowerRite or Vico Jet pump, WE DO NOT HAVE REPLACEMENT PARTS. If your Jet pump is an LX jet pump (Vendor Code 3536) the complete wet end must be purchased. Please call our techs for further information and help in finding the correct parts. 

Price: $28.30
Motor, 2.0 Hp, Wavemaster 8000 (ver. 2)

Factory replacement motor for the Wavemaster 8000 (2HP) two   horsepower jet pump.

Price: $426.88
Mounting Bolt Washer, Wavemaster

Stainless steel washer used with the bolts that secure a pump to the pump stand and the pump stand to the floor of the equipment compartment.

(12) on the Wavemaster 4000 parts page
(12) on the Wavemaster 6000 parts page
(11) on the Wavemaster 7000 (ver. 3) parts page
(11) on the Wavemaster 8000 (ver. 2) parts page
(17) on the Starite 1Hp parts page
(17) on the Starite 2Hp parts

Price: $1.30
Pump Shroud, Wavemaster

This part is obsolete at the factory but we have 1 left in-stock.

Replacement manifold (pump shroud) for the Watkins Wavermaster 3000, 5000 (ver. 1),  7000 (ver. 3) and 8000 (ver. 1 & 2) jet pumps that used an Emerson motor. This shroud attaches onto the rear of the motor and its purpose is to divert heated air from the motor through an exhaust hose to the exterior of the spa. Cool running pump motors last longer!

Price: $18.79
Rubber Feet, Wavemaster (Set of 4)

Rubber Mounts (feet) for the Wavemaster jet pump. These are used to buffer the vibrations from the jet motor within the equipment compartment.  Comes in a set of four.

Price: $15.40
Shaft Seal Kit, Wavemaster

GECKO MODEL SHAFT SEAL

The shaft seal kit is used to prevent water leaking from around the rotating pump shaft. This seal kit is used on most of the Wavemaster jet pumps including the Wavemaster 3000, 4000, 5000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000, 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 2), 9000 (ver. 3), and 9200 jet pumps.

Please note:  If your pump has a vendor number of "4081" on it, then use this part. If your pump has a vendor number of "3536" on it, use part number 77363

**If the vendor number is "3861", WE DO NOT HAVE REPLACEMENT PARTS. Please order the complete pump 71699.

Price: $23.57
Volute Cover Screw, 8-32 X 5/8", Wavemaster

GECKO MODEL SCREW

This stainless steel screw is used to attach the volute cover to the volute on most Wavemaster jet pumps.

Price: $1.64
Volute O-Ring, Wavemaster

This is the largest O-ring used on the current Wavemaster series of wet ends for Hot Springs, Tiger River, Solana and Hot Spot model spas.  This o-ring fits between the suction cover and the volute of the pump.  This o-ring is only compatible if your pump has 8 phillips head screws that hold the suction cover to the wet end, and the volute has 2" suction and discharge fittings.

List Price: $2.00
Price: $2.23
Wear Ring, Wavemaster

GECKO MODEL WEAR RING

Wear Ring (slinger) for the Watkins Wavemaster 4000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. Please note: This wear ring is for pumps that have a Vendor Number of "4081" printed on the pump motor. Click more info for details. 

Price: $2.57
Wet End Kit, Wavemaster 8000/8200 (ver. 2) 2.0 hp Pump

 Please Note: if your pump has Vendor number "4081" use this wet end kit.  If your pump has vendor number "3536" use part number 77712

This is the entire "wet end" for the Wavemaster 8000 2.0 hp jet pump and Wavemaster 8200 2.0hp two speed jet pump. Click on the "More Info" button for details.

:
:
List Price: $130.71
Price: $111.10
Wet End Kit, Wavemaster 8000/8200 (ver. 2) 2.0 hp Pump

This is the entire "wet end" for the Wavemaster 8000 2.0 hp jet pump and Wavemaster 8200 2.0hp two speed jet pump. Click on the "More Info" button for details.  Please Note: if your pump has Vendor number 3536 use this wet end kit.  If you pump has vendor number 4081 use part number 72995.

:
:
List Price: $130.71
Price: $111.10