Wavemaster® 8000 (ver. 3) parts

This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling. It is found on the suction side of most Wavemaster® Jet Pumps. Other compression fittings are the # 71038) and # 71037.

OBSOLETE-Use drain fitting 32267 or 32267-1.
Used on the drain fitting on the front of various Wavemaster jet pumps.

This exhaust hose connects onto the rear of the jet pumps shroud (if equipped) to discharge hot air from the jet pump motor. This method of cooling the jet pump insures a longer lifespan of the pumps motor.

Impeller for the Wavemaster 8000 (ver. 2), Wavemaster 8000 (ver. 3) and the Wavemaster 8200 jet pump. This impeller screws onto the pump motor's threaded shaft with regular right hand threads.

Watch Video

**If your pump has vendor number of "3861" or is a PowerRite or Vico Jet pump, WE DO NOT HAVE REPLACEMENT PARTS. If your Jet pump is an LX jet pump (Vendor Code 3536) the complete wet end must be purchased. Please call our techs for further information and help in finding the correct parts. 

OBSOLETE

For Magnetek or AO Smith Century Motors Only
Replacement manifold (pump shroud) for the Watkins Wavemaster 4000, 5000, 5000 (ver.2), 6000, 7000 (ver. 3), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. This shroud attaches onto the rear of the Magnetek or AO Smith Century motor. Its purpose is to divert heated air from the motor through an exhaust hose to the exterior of the equipment compartment. Cool running jet pump motors last longer!

Used on the base of the Wavemaster 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pump to reduce the pumps noisy vibrations being transferred to the spa shell. Sold individually.

GECKO MODEL SHAFT SEAL

The shaft seal kit is used to prevent water leaking from around the rotating pump shaft. This seal kit is used on most of the Wavemaster jet pumps including the Wavemaster 3000, 4000, 5000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000, 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 2), 9000 (ver. 3), and 9200 jet pumps.

Please note:  If your pump has a vendor number of "4081" on it, then use this part. If your pump has a vendor number of "3536" on it, use part number 77363. 

**If the vendor number is "3861", WE DO NOT HAVE REPLACEMENT PARTS. Please order the complete pump 71699.

Please check vendor code on your pump before ordering replacement parts. For an example of where to find your vendor code, click here.

GECKO MODEL SCREW

This stainless steel screw is used to attach the volute cover to the volute on most Wavemaster jet pumps.

GECKO MODEL VOLUTE COVER

The volute suction cover is the second half of the pumps volute. This factory replacement is for the Wavemaster 4000, 6000, 7000 (ver. 3), 8000 (ver. 3), 8200, 9000 (ver. 3), 9200 jet pumps. Click on the "More Info" button for details.

GECKO MODEL O-RING

Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver. 3), 8200, 9000 (ver. 3), 9200 jet pumps.

GECKO MODEL VOLUTE

This part connects onto the motor using four long hex bolts that insert through the rear of the pump motor and screw into this volute. Replacement volute for the Wavemaster 4000, 6000, 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. Clcik on the "More Info" button for details.

GECKO MODEL WEAR RING

Wear Ring (slinger) for the Watkins Wavemaster 4000, 5000 (ver. 2), 6000, 7000 (ver. 3), 8000 (ver. 2), 8000 (ver. 3), 8200, 9000 (ver. 3) and 9200 jet pumps. Please note: This wear ring is for pumps that have a Vendor Number of "4081" printed on the pump motor. Click more info for details.