Sub Panels & GFCI Breakers

This 15amp Mini Breaker is located on the control box on all 1993-1998 Hot Spot spa models. This reset button is identified by the number 15 located on the round portion of the reset button.

GENERIC (This does not come from Hot Spring factory and does not have a one year warranty)

This generic replacement 15amp Mini Breaker is used to replace the original mini breaker located on the control box on all 1993-1998 Hot Spot spa models. The reset button is identified by the number 15 located on the round portion of the reset button.

For Hot Spring & Tiger River spas
This Cutler Hammer complete sub panel comes with two GFCI breakers, one 20amp 115volt (single pole single throw) and one 30amp 230volt (double pole double throw). This sub panel is used to safely convert a 115volt/230volt convertible Hot Spring or Tiger River to 230volts (also referred to as 220). Click the "More Info" button for details.

See item 37087 for the Square D brand

This complete GFCI Sub panel with a 30amp GFCI 115volt (single pole single throw) breaker can be used to convert the power supply to the spa so that the heater operates at the same time the jets are running on "high-speed". This option is primarily for extended use for more than two hours with jets on high in extremely cold climates. Use this sub panel on the Solana 2000-2002 X, 2003-current RX & TX and the 2006-current SX spa models.Also all 1998-2002 Hot Spot models.

This complete sub panel comes with one 50amp 230volt GFCI breaker. The sub panel is used standard (comes from the factory with this sub panel) on the 2003-2009 Hot Spot Mallorca and 2008-2009 La Palma. It can be used to convert a  2003-2009 Sorrento & Trinidad and the 2003-2007 Tobago to a 50amp 230volt system. Likewise all 2006 forward Solana spa models.

For Hot Spring, Tiger River & Limelight spas
This Cutler & Hammer brand sub panel comes complete with two GFCI breakers, one 20amp 230volt (double pole double throw) and one 30amp 230volt (double pole double throw). This sub panel is used on all permanently connected 230volt only (factory designed to ONLY operate on 230volts) Hot Spring & Tiger River spa models.

For the Square D brand version of this sub panel, use item 37086

This is the replacement GFCI 20amp 115volt breaker for Watkins G.E. sub panel part #20679 used on Hot Spring & Tiger River spa models designed to operate on either 110volts or 220volts.

This is the replacement GFCI 20amp 230volt breaker for the Watkins G.E. sub panel part #31578.

This is the replacement GFCI 30amp 230volt breaker for both Watkins G.E. sub panels part #31578 and part #20679.

This is the replacement GFCI 20amp 120volt breaker for the Cutler & Hammer sub panel part # 301756. 

This is the replacement GFCI 20amp 230volt breaker for the Cutler & Hammer sub panel part # 301755.  This GFCI is included with the subpanel that comes with newly shipped Hot Springs, Limelight and Tiger River spas running on 220 volts.

This is the replacement GFCI 30amp 230volt breaker for the Cutler & Hammer sub panels part # 301755 & 301756.

This is the replacement GFCI 50amp 230volt breaker for the optional Watkins 50amp GFCI sub panel made by General Electric

This is the replacement GFCI 50amp 230volt breaker for the optional Watkins 50amp GFCI sub panel made by Cutler & Hammer.  This breaker is what is typically used in the subpanel included with 230 volt Hot Spot model spas.

This is the replacement GFCI 20amp 115volt breaker for Watkins sub panel part #37087.

This is the replacement GFCI 20amp 230volt breaker for Watkins sub panel part #37086.  Typically used on older Hot Springs and Tiger River spas set up for 220 volt operation.  The jet pumps and control system run on this breaker, although on certain models a separate 10 amp 115 volt GFCI was used for the control system.

This is the replacement GFCI 30amp 230volt breaker for Watkins sub panel part #37086 and part#37087. This breaker was typically used on 1990s 220 volt Hotsprings and Tiger River model spas.  The heaters for the 220 volt models run on this breaker.

For Hot Spring, Tiger River & Limelight spas
This Cutler & Hammer brand sub panel comes complete with two GFCI breakers, one 20amp 230volt (double pole double throw) and one 30amp 230volt (double pole double throw). This sub panel is used on all permanently connected 230volt only (factory designed to ONLY operate on 230volts) Hot Spring & Tiger River spa models.

For the Cutler & Hammer brand version of this sub panel, use item 301755

For Hot Spring & Tiger River spas

This Square D brand sub panel comes complete with two GFCI breakers, one 20amp 115volt (single pole single throw) and one 30amp 230volt (double pole double throw). This sub panel is used to safely convert a 115volt/230volt convertible Hot Spring or Tiger River to 230volts (also referred to as 220). Click the "More Info" button for details.

See item 301756 for the Cutler & Hammer brand